Innovations in Heating and Cooling
It’s not a secret that the engine of your car performs best when it is at a warmer temperature. The heat must be able to travel somewhere. Radiators are the answer.
A cooling system uses refrigerant, fans and ductwork to distribute the air. Heating systems use an energy source like oil or gas to warm the air.
Variable-Speed Technology
Variable speed technology is an important advancement in the field of heating and cooling. The blower motors of gas furnaces and air handlers use this technology to control the airflow through your home. This technology is designed to eliminate cold and hot spots, as well as improve dehumidification during the hot southern summers.
The concept behind variable speed technology is to match the system’s output to the needs of your home’s energy. For instance, most people don’t drive with just one gear, instead opting to change gears to match the requirements of their vehicle and the road conditions. This concept also works in your home. Variable speed systems offer homeowners and contractors a broad array of benefits that include energy savings, reduced noise levels, enhanced indoor air quality, and the potential for utility company rebates.
The variable-speed technology lets your system operate more efficiently in light load conditions. This is because traditional systems work with a set temperature and then reaching the desired temperature, and then turning off. The system will cycle back on when the temperature inside your home reaches the desired comfort level. This continuous cycle consumes an enormous amount of energy, especially since the system is running at full capacity again.
A variable-speed system permits the compressor to operate at a lower level for longer periods of time, while using less energy. The result is that your system can save up to 30 percent on energy costs.
Variable speed technology can be used in combination with other energy efficiency improvements like zoning systems and smart controls to boost the efficiency of your system and performance. Ask our team of experts to determine if a system using Greenspeed Intelligence and variable speed technology is the best option for your home.
We can help you make the right decision for your home. We will explain the advantages of a variable speed system and how it can be used together with other energy-efficient products to produce the best results. Our certified HVAC experts can help you navigate the process of selecting the right system. Contact us today to learn more about our range of high-tech variable speed heating and cooling systems backed by Carrier.
Wi-Fi(r) Controls
Wireless smart thermostats allow homeowners to have greater control over their HVAC systems, while also reducing energy costs and increasing comfort. These thermostats use wireless communications to connect with an app on a smartphone or computer giving users the ability to monitor and alter the temperature of their home remotely. These devices can also learn the habits of households and automatically alter routines, reducing energy use when no one is home, or increasing comfort once residents return.
Smart thermostats are simple to use and allow you to check your system at any time. They will detect when you are away from home and enter an energy-saving “Away” mode to help you save money on your electric bills. When you return home, they will switch to ”Home” mode for the best comfort.
The Wi-Fi(r) controls are more sophisticated than conventional thermostats and come with additional convenience features like email notifications remote system monitoring, and a custom web portal that displays like your thermostat. They also let you control multiple zones from a single device. They are perfect for managing a rental or holiday home from afar.
A programmable thermometer can be programmed to alter temperature at different times during the day to ensure maximum comfort. This is ideal for homeowners as well as tenants. It can be difficult to keep track of the schedule of a thermometer programmable, especially with busy schedules and kids’ activities. A smart thermostat that has an inbuilt sensor monitors occupancy in rooms temperature, indoor and outdoor temperatures, humidity and temperatures to monitor the current conditions. It also tracks your energy consumption to determine whether heating or cooling is needed and adjusts accordingly.
The Wi-Fi(r) control’s sensors and intelligent programming can dramatically reduce your home’s energy consumption by 10 percent or more. They’ll not only reduce your energy bills, but they can also help to lower your carbon footprint and contribute to a better environment.
ENERGY START(r) Certification
ENERGY STAR is one of the most well-known and easily recognized labels in the country. It’s that blue label that you see on your fridge, light bulbs and other appliances. When you buy products with the ENERGY STAR logo, you know that they’ve been independently tested and verified to meet strict specifications for energy efficiency and reduce greenhouse gas emissions.
The same standards that are applicable to individual products can be applied to whole buildings. To be eligible for the ENERGY STAR certification buildings must show at least 15% higher performance than the ASHRAE 90.1-2010 (or the state building code that it is permitted). The performance goal is based on a variety of factors that impact the energy use of buildings, such as the weather conditions, occupancy levels, and the size of the heating and cooling system and type.
A building must be independently checked by a HERS Rater to be eligible for the ENERGY STAR Certification. The HERS Rater inspects the insulation, air barrier, and HVAC equipment in a house to make sure they are installed and sized correctly. The Rater conducts thorough inspections of the ducts and ventilation.
Each of these steps is designed to help the homeowner save money and energy while preserving their health and the environment. This makes ENERGY STAR certification an excellent method to add value to any apartment or home. Studies have proven that ENERGY STAR approved apartments and homes are typically sold or rented at higher prices than those without the certification.
In addition to delivering cost savings over the long term In addition to delivering long-term cost savings, in addition to delivering long-term cost savings, STAR certified buildings have also been shown to have lower operating costs than comparable buildings. They are also more comfortable to live in and consume less energy. The EPA estimates that ENERGY certified homes can save Americans $39 billion annually in energy costs.
High-Efficiency Systems
A high-efficiency HVAC is more than a way to cut down on your energy bills. It’s also a way to improve the environment and reduce carbon emissions. High-efficiency systems can use up to one third less energy than previous models, which means lower costs for utilities. High-efficiency systems cut greenhouse gas emissions and use low-ozone, non-toxic refrigerants.
It might cost more to install a new, high-efficiency system than an older model. However, it will pay for itself in the long run in the form of lower costs for energy and maintenance. It could also boost the value of your home, making it easier to sell.
High-efficiency systems offer a wide variety of benefits, including improved comfort, quieter operation, and improved indoor air quality. For instance, the latest filters remove more harmful pollutants from the air. They can also improve the comfort of occupants by providing precise temperature control, eliminating hot or cold spots.
Heating and cooling consume about 45% of the energy consumed by the average household. Replacing your outdated HVAC system with a more efficient unit will begin saving money on energy bills from the first bill you receive. It is easy to find an Air conditioner or AC that is suitable for your needs by determining the annual fuel utilization efficiency (AFUE) rating. The higher the AFUE rating is, the more efficient the unit is.
New energy-efficient furnaces can achieve up to 98% AFUE, converting all the energy used to heat the source of fuel into warmth for your home. This is a major improvement over conventional furnaces, which operate at 80% AFUE and waste 35% of their fuel.
High-efficiency units consume less energy and emit less greenhouse gases than earlier models, which helps to conserve the earth. They can also use nontoxic refrigerants that eliminate the need to make chemicals that harm ozone. By incorporating high-efficiency systems into green construction projects, builders, contractors and owners can reduce environmental impact. These systems can also reduce construction costs, making it a smart investment both for builders and the building’s occupants.